This
motorized
goniometer
is
made
of
aluminum
alloy
with
an
elegant
black
anodized
surface.
The
bench
size
is
65 X
65
mm
and
has
a
body
weight
of
0.75
kg.
The
drive
mechanism
is
worm
and
worm
gear.
The
worm
gear
ratio
is
252:360.
It
provides
+/-15°
of
rotation
at a
maximum
speed
of
10°
per
second.
The
maximum
load
of
this
goniometer
table
is 5
kg.
The
calibrated
indicator
shows
of
the
angle
of
rotation.
The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.
This
stage
is
compatible
with
OES'
line
of
Motion Controllers.
Specifications
Type |
AK110-15 |
Range of Travel |
+/-15° |
Table Size |
65 mm×65 mm |
Gear Ratio |
15 : 252 |
Height of Rotation Stage |
55 mm+/-0.2 mm |
Drive Mechanism |
Worm Gear |
Travel Guide |
Crossed-roller Guide |
Stepper Motor |
|
Phase Resistance
|
3.8 Ohm, Bi-directional |
Maximum Phase Current |
1 Amp |
9 pin DB-9 Male Connector |
Pin Assignment and Description |
1,2,3,4,5 |
|
6 |
Phase A+ |
7 |
Phase A- |
8 |
Phase B+ |
9 |
Phase B- |
|
Base Material |
Aluminum Alloy |
Surface Treatment |
Black Anodized |
Load Capacity |
5 kg |
Weight |
0.75 kg |
|
|
Rotation Center Deflection Accuracy |
0.03 mm |
Maximum Speed |
10 °/sec |
Typical Repeatability |
+/-4″ |
Typical Positional Accuracy |
+/-9″ |
Typical Backlash |
+/-3″ |
|