|
Features
-
Compact
-
Multi-axis
-
Stand-alone
-
Plug-and-Play
-
Built-in Self Test
-
Three Speed Ranges, Fast, Medium, and Slow Mode,
more info...
-
Proportional Speed Control,
more info...
-
Positive and Negative Limit Switches per Axis
-
Zero Adjustment of Joystick on Power-up
-
Pre-wired
Motors,
Joystick
and
Trackball
-
Available to Drive Stepper, DC Servo, Brushless, and Voice Coil Motors
-
Optional Limit Switches per Axis
-
Optional External STEP and DIRECTION Signals per Axis
-
Optional
Gyroscope
Stabilization
-
Totally Integrated Solution
-
Evaluation Unit Is Available upon Request
|
|
Stepper Motor Driver
- Up to 7 Amp Phase Current
- +12 VDC to +80 VDC Power Supply
- 2 to 256 Micro-steps per Step Resolution
- Size 8 to 42 Motors
- Auto Current Reduction
DC and Three Phase Brushless
Motor Driver
- Up to 40 Amps Phase
Current
- +18 VDC to +80 VDC Power
Supply
|
|
This
motion control system is
capable of moving a group of motors via controlling the movement of a
joystick
or
trackball. The speed of the
motor is
proportional to the tilt angle of the joystick or the rotational speed of the trackball.
This series
is complete
multi-axis, multi-speed, stand-alone, easy-to-use, plug-and-play, and low
cost for manual stepper or servo motor control
applications . They can
replace or upgrade manual systems, motorizing them with precision joystick
and/or trackball control.
Each system includes
the
power supplies, controller,
the micro-stepper and/or servo motor drivers.
Controlling devices include analog
joystick, trackball, two-phase quadrature signals, digital potentiometer, DC voltage, and external step and direction signals.
NO PROGRAMMING IS NECESSARY.
This series is also available
without the drivers. The outputs from the system would be power, enable,
step and direction signals. This configuration is suited to interface with
the "integrated motor and drivers".
More Info...
GUI to set the step rates
 |